Furniture Delivery Access Guide: Will Your Furniture Actually Fit Through the Door?

A sofa can fit perfectly in your living room and still never reach it.
This happens more often than people expect. The room is measured carefully, but nobody checks
the main door, lift, staircase or corridor turn until delivery day.
Before ordering large furniture, here is what actually needs to be measured.

1. Check the Narrowest Doorway
   Measure the clear opening, not the door frame from edge to edge. An open shutter, handle or
   security door can reduce usable width.
   For large pieces, note:
   • clear door width
   • clear door height
   • diagonal opening
   • space immediately before and after the door
   A 90 cm wide piece may still fail through a 95 cm doorway if there is no room to rotate it.
   
2. Measure the Lift, Not Just the Lift Door
   For apartments, check:
   • lift door width and height
   • internal lift depth
   • internal diagonal
   • lobby space outside the lift
   • turning space on your floor
   A long console, tabletop or headboard may enter diagonally even when it does not fit straight. But
   this should be checked before production, not tested during delivery.
3. Staircase Turns Are Often the Real Problem
   Straight staircases are relatively simple. L-shaped and U-shaped stairs can create problems because
   furniture needs space to rotate at landings.
   Measure:
   • staircase width
   • landing depth
   • ceiling height
   • handrail projections
   • tight turnsThe narrowest point controls the delivery route.
4. Corridor Turns Matter
   A wide corridor does not guarantee access. A sharp 90-degree turn near a bedroom can stop a long piece completely.
   This is especially important for:
   • sofas
   • beds
   • wardrobes
   • dining tabletops
   • large consoles
   • upholstered headboards
5. Ask What Can Be Detached
   Good furniture planning can solve many access problems.Depending on the design, manufacturers may use:
   • detachable sofa legs
   • removable arms
   • sectional sofa modules
   • detachable dining table bases
   • split bed frames
   • knock-down structures

A dining table that cannot enter in one piece may be easy to install if the top and base travel separately.

A Simple Rule Before Ordering
Measure the furniture and the complete delivery route:

Building entrance → lift or staircase → corridor → room door → final position

At Maple Furnishers, access constraints can be considered before custom furniture enters
production. In many cases, a small construction decision, such as a detachable base or modular frame, can prevent a major installation problem later.

The furniture does not only need to fit the room.

It needs to reach it first.

Rezaa Modasiya

Author | Maple Furnishers